Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Audi A4 gear lever gaiter

Model: Audi A4 B8 - Years 2007-2016
Part: Shifter boot

In this short but effective video we will see how to remove the Audi A4 B8 gearshift gaiter. First we are going to unhook the gearshift cap which is attached by means of iron hooks: then we will simply pull it upwards to be able to remove it. Once this is done, we will see that the cap is blocked by an iron clamp that we will unscrew: so we can finally remove it and replace it with a new one. It is recommended to fit the replacement of the original headset as it turns out to be much more durable than a compatible replacement (and even more beautiful to look at).

Posted on 27 June 2020 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the gear knob on the Audi A4 B8?
How do you replace the gear knob on the Audi A4 B8?
Audi A4 (2007-2016 / B8) In order to replace the gear knob on the Audi A4 B8, you need to detach the fixing clips that block the leather gaiter at the base of its housing. By…
How to replace the gearshift gaiter on an Audi A4
How to replace the gearshift gaiter on an Audi A4
Audi A4 (1994-2000 / B5) Before starting, we will have to sit in the driver's seat of our Audi A4. So let's start by disassembling and removing the gear knob, simply by unscr…
Removing the Audi A4 B8 gear knob
Removing the Audi A4 B8 gear knob
Audi A4 (2000-2004 / B6) In this video tutorial we will see how to remove and replace the gear knob of an Audi A4 B8. First of all, let's get on board the car and first of al…

How to Remove the Front Bumper of a Subaru Impreza

Do you want to replace the front bumper of a Subaru Impreza? Follow this guide. Lift the bonnet and secure it. Using a socket wrench, unscrew the fastening bolts of the bumper located at the top as shown in the video. Once this is done, unscrew the screws of the splash guard located near the wheels, and finally remove the plastic pins/rivets at the bottom of the bumper. Remove the bumper from the vehicle body by hand. To proceed with the installation, position the bumper as shown in the video and tighten all screws around the splash guard and the perimeter.

Watch the video!


by ScegliAuto

More videos