Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the Audi Q7 headlight

Model: Audi Q7 4L, MK 1 - Years 2006-2015
Part: Headlight

In this video we will see how to remove the front headlight of the Audi Q7. First we go to open the bonnet of our car and proceed with disassembling the long plastic bulkhead that we find above the headlights: now with a screwdriver we will simply unhook a tab and the connector to be able to completely remove the headlight from the car. Now with a torx wrench we are going to remove the control unit from the lighthouse by unscrewing the screws and extracting the headlight motor. Proceed with the reassembly of the following components of the new headlight and reassemble everything, remembering to connect all the connectors.

Posted on 2 July 2020 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the front headlight and its bulb of the Audi Q7
How to disassemble the front headlight and its bulb of the Audi Q7
Audi Q7 (2006-2015 / 4L, MK 1) The following steps will show us how to disassemble and replace the front headlight and its bulb of the Audi Q7. First, we open the hood of the car a…
How to replace the rear headlight bulb of the Audi Q7
How to replace the rear headlight bulb of the Audi Q7
Audi Q7 (2006-2015 / 4L, MK 1) To replace the rear headlight bulb of the Audi Q7, we can perform two types of procedures. To perform the first procedure, we need to remove the cap …
How to disassemble the starter motor in an Audi Q7?
How to disassemble the starter motor in an Audi Q7?
Audi Q7 (2006-2015 / 4L, MK 1) In this tutorial, we can see how to disassemble the starter motor in the Audi Q7, a simple operation but one that requires good manual dexterity. Fir…

Other guides you may be interested in

How to Change the Brake Pads on a Volkswagen New Beetle

Learn how to change the front brake pads on a Volkswagen New Beetle. First, lift the car on a column lift to the desired height, then remove the wheel (using a telescopic spanner or air impact wrench) along with the respective bolts. Unscrew the locking bolt of the brake caliper, remove it from the wheel hub support, and detach the pads from the brake caliper using a screwdriver. Install the new pads on the brake caliper and refit the brake caliper to the support; tighten all bolts and remount the wheel. Proceed to perform the same operations on the other calipers present on the vehicle.

Watch the video!


by ScegliAuto

More videos