Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. Q7
    4. : How to disassemble the starter motor in an Audi Q7?

Audi Q7 - Video tutorial

Model: Audi Q7 4L, MK 1 - Years 2006-2015
Part: Starter motor
Operation: How to disassemble the starter motor in an Audi Q7?

In this tutorial, we can see how to disassemble the starter motor in the Audi Q7, a simple operation but one that requires good manual dexterity. First of all, we disconnect the negative terminal of the battery, then we release the service belt by loosening the tensioner. We then lift the front right side, unscrew the two indicated bolts, separate the alternator from the engine, and proceed by disconnecting the power supply to the starter motor. At this point, all that remains is to unscrew the indicated fixing bolts, disassemble the starter motor, and follow the reverse procedure to reassemble everything.


Posted on 18 May 2023 by ScegliAuto



Guide to replacing the starter motor of the Audi Q7 3.0 TDI
Audi Q7 (2006-2015 / 4L, MK 1) Today's guide will show us how to disassemble and replace the starter motor of the Audi Q7 3.0 TDI, as well as the Volkswagen Touareg. First, we open
Remove the mirror on Audi Q7
Audi Q7 (2015-2024 / 4M, MK 2) Do we want to remove the exterior mirror of the Q7? Let's see how it disassembles. We pry between the perimeter of the mirror frame and the mirror gl
How to remove the Audi Q7 headlight
Audi Q7 (2006-2015 / 4L, MK 1) In this video we will see how to remove the front headlight of the Audi Q7. First we go to open the bonnet of our car and proceed with disassembling

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos