Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the fog light on Audi A4

Model: Audi A4 B8 - Years 2007-2016
Part: Fog lights

Replacing a broken fog light on an Audi A4? We disassemble the spotlight in the bumper and remove it if necessary. We remove the cover placed in the plastic stone guard of the front wheel, we arrive at the fog light placed in the bumper. We unscrew the screws located on the sides of the fog light. After removing the fog light, we disassemble the lamp holder, remove the damaged bulb and mount a new one (same size and voltage). We mount the new fog light on the bumper. We reassemble the cover cover. We test the correct operation of the newly mounted fog light.

Posted on 9 August 2020 by ScegliAuto

Video tutorial

Related tutorials

How to remove the front fog lights of the Audi A4
How to remove the front fog lights of the Audi A4
Audi A4 (2007-2016 / B8) In this short guide, we will see step-by-step instructions that will allow us to disassemble and replace the front fog lights of the Audi A4. First o…
Replacement of the front fog light bulbs of the Audi A4
Replacement of the front fog light bulbs of the Audi A4
Audi A4 (2007-2016 / B8) The following steps will show us how to disassemble and replace the front fog light bulb of the Audi A4. First, let's move to the front of the car an…
How to replace the fog light bulb on the Audi A4 B8 8K
How to replace the fog light bulb on the Audi A4 B8 8K
Audi A4 (2007-2016 / B8) In this video we can see how to change the bulb of a fog light on an Audi A4 B8: we have to do the work from the front wheel arch, where we can easil…

How to Replace the Timing Belt on a Lancia Delta

How do you replace the timing belt on a Lancia Delta? Lift the car on a column lift. Open the bonnet, remove the engine soundproofing panel and the metal timing belt cover. Using a suitable spanner, loosen the tensioner pulley and slide the belt off its seat. After fitting the new belt, use the spanner to tension the tensioner pulley, tightening until the belt has the correct tension (as previously installed). Finally, check the tensioner and the belt itself, and tighten everything with a socket wrench.

Watch the video!


by ScegliAuto

More videos