Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front fog light bulbs of the Audi A4

Model: Audi A4 B8 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Fog lights

See other generations:
Video tutorial

The following steps will show us how to disassemble and replace the front fog light bulb of the Audi A4. First, let's move to the front of the car and start by removing the plastic grille of the fog light, levering on the sides; then unscrew the fixing screws of the fog light, disconnecting the electrical connector to remove the light, as shown in the video.

At this point, install the new fog light bulb, of the correct type and with the same fitting; then reassemble the light and finally the outer plastic grille of the bumper!


Posted on 19 February 2025 by ScegliAuto


Related tutorials

Remove the Front Headlight on Audi A4
Remove the Front Headlight on Audi A4
Audi A4 (2000-2004 / B6) Removing the front headlight on an Audi A4. Open and lift the hood. Remove the upper screws located above the front headlight. Once all the headlight…
How to Change the Headlight Bulbs on an Audi A4
How to Change the Headlight Bulbs on an Audi A4
Audi A4 (1994-2000 / B5) How to change the headlight bulbs on an Audi A4? Open the hood by pulling the lever located at the bottom left of the dashboard; secure it. Locate th…
How to Change the Headlight Bulbs on an Audi A4
How to Change the Headlight Bulbs on an Audi A4
Audi A4 (2004-2008 / B7) Let's see how to change the headlight bulbs on an Audi A4. Open the hood by pulling the lever located at the bottom left of the dashboard; secure it.…

Other guides you may be interested in

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos