Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the Audi A6 air filter

Model: Audi A6 MK 3, C6 - Years 2004-2012
Part: Air filter

Replace the air filter on Audi A6? Let's see the replacement of the filter. We lift up the front hood, we secure the same with the rod. We remove the soundproofing panel of the engine, then, we disassemble the clamp of the air tube (we unscrew the clamping screws), we uncover the container of the box and extract the worn air filter. We insert a new filter in the dedicated housing (making it adhere well around the walls). We mount the cap of the air box and tighten the screws of the clamp placed above the air tube and the engine cover panel. We close the front hood at the end of disassembly.

Posted on 9 September 2020 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on Audi A6
How to Replace the Air Filter on Audi A6
Audi A6 (2011-2018 / MK 4, C7) Let's see how to replace the engine air filter on an Audi A6. Open the car door, pull up the hood release lever located at the bottom left of the das…
How to replace the air filter of the Audi A6 2.7 TDI
How to replace the air filter of the Audi A6 2.7 TDI
Audi A6 (2004-2012 / MK 3, C6) Following these brief instructions, we will see how to disassemble and replace the engine air filter of the Audi A6 with a 2.7 TDI engine, in simple …
How to replace the engine air filter of the Audi A6 2013
How to replace the engine air filter of the Audi A6 2013
Audi A6 (2011-2018 / MK 4, C7) If you own an Audi A6 (2013) and need to replace the engine air filter by yourself, all you have to do is read the following guide and follow all the…

Other guides you may be interested in

Removing the Drive Shaft on a Fiat Panda

Learn how to remove the drive shaft on a Fiat Panda. Lift the car on a column lift and locate the drive shaft. Using a socket spanner, undo the securing bolts on either side of the drive shaft (remove the bolts around the plates) where it is situated. Once the part is removed, take it out of the vehicle (replace it with a new drive shaft). Finally, refit the new drive shaft (connect it on both sides) and tighten the appropriate bolts. Lower the car and test its proper functioning.

Watch the video!


by ScegliAuto

More videos