Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Rear light replacement on Audi A4

Model: Audi A4 B6 - Years 2000-2004
Part: Tail light

Disassembly of the rear light to replace it or to replace damaged bulbs inside. We raise the tailgate. Let's get a socket wrench, remove the screw cap on the side of the upholstery in the luggage compartment. We unscrew the screw located in the back of the lighthouse, remove the lighthouse. We disconnect the power supply terminals and replace the damaged bulbs. We replace the rear light if damaged. We mount the rear light with all the attached parts for operation (screws, screw caps). We turn on and run a light test.

Posted on 23 October 2020 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear bumper of the Audi A4
How to remove the rear bumper of the Audi A4
Audi A4 (2000-2004 / B6) Let's see in this guide the instructions on how to disassemble and replace the rear bumper of the Audi A4, in simple and quick steps. First of all, l…
Replacement low beam bulb on Audi A4 B6
Replacement low beam bulb on Audi A4 B6
Audi A4 (2000-2004 / B6) Lift the hood and put on the special support rod. Unscrew the three torx shown in the video and which are intended to fix the light (two are located …
Replacing Interior Lights with LED Lights
Replacing Interior Lights with LED Lights
Audi A4 (2007-2016 / B8) LED lights have undeniable advantages over incandescent bulbs, especially in terms of efficiency and light tone. There are many aftermarket kits avai…

How to Remove the Front Shock Absorber on a Peugeot 406

How to remove the front shock absorber on a Peugeot 406? The first step is to lift the bonnet and secure it with the prop rod. Use a socket wrench to unscrew the shock absorber mounting bolts (engine bay), lift the car on a column lift and remove the front wheel. Unscrew the shock absorber mounting bolts at the wheel hub (detach the brake line clips with a screwdriver). Unscrew the bolts on the side, then remove the shock absorber from its housing (place a support under the bar). Compare the old part with the new one and prepare for installation. Fit the new shock absorber to the car, working in reverse order.

Watch the video!


by ScegliAuto

More videos