Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the lock and glove box handle Audi A4 B7

Model: Audi A4 B7 - Years 2004-2008
Part: Handle

Today we will see the main instructions to be able to disassemble and remove the handle and lock of the glovebox of an Audi A4 B7. First of all we get on board the car and open our glove box; then we remove the latter, removing all the fixing screws, and we go to unscrew the side screw of the lock in order to remove the handle and the lock itself, as shown in the video. At this point we will first extract the cylinder and then eventually replace the whole piece; in any case we apply the reverse procedure for reassembly!

Posted on 12 December 2020 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the storage compartment drawer handle of the Audi A4.
Replacement of the storage compartment drawer handle of the Audi A4.
Audi A4 (2000-2004 / B6) Let's take a look at the steps on how to disassemble and replace the handle of the storage compartment drawer in the Audi A4, following the instructi…
Removing the glove box Audi A4 B6
Removing the glove box Audi A4 B6
Audi A4 (2000-2004 / B6) In this video we will see the instructions to be able to disassemble the glove box of an Audi A4 B6 and B7. First we get on board the car and go to o…
Removing the door lock module Audi A4 B8
Removing the door lock module Audi A4 B8
Audi A4 (2007-2016 / B8) Let's see in this video the steps to be able to remove the rear door lock module of an Audi A4 B8. First of all, we open the door and remove the door…

How to Remove the Front Brake Pads on a Chrysler PT Cruiser

To remove the front brake pads on a Chrysler PT Cruiser, position the car on a column lift and raise it to a comfortable height. Unscrew the pins using a socket wrench or air drill and remove the wheel. Then, use a screwdriver to detach the brake pads. Next, remove the caliper bracket and unscrew the pins on the brake disc (using a Torx screwdriver). Pull the disc towards you to slide it off the hub. Install the new brake disc with all associated pins, secure the caliper bracket to the disc and the pads, then mount the brake caliper, ensuring all pins are tightened properly. Before mounting the wheel, bleed the brake caliper and tighten the pin.

Watch the video!


by ScegliAuto

More videos