Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Change oil on Audi A3

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Engine oil

Do we want to replace the engine oil on our Audi A3? Let's see how to replace the oil together with the filter. We lift the car on a pillar or jack bridge, disassemble the plastic panel. We unscrew the pin of the oil pan with a socket wrench (after removing the protective plastic panel), let the liquid flow into a container and screw the pin. After removing the oil from the engine, we just have to unscrew the oil filter with a socket wrench. We bring the car to the ground and lift the bonnet, let's put it in safety. We top up the engine with the new liquid.

Posted on 20 December 2020 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Audi A3 Oil Change light?
How do you reset the Audi A3 Oil Change light?
Audi A3 (2012-2019 / MK 3, 8V) To be able to reset the Oil Change warning light on the Audi A3, you need to go and turn on the instrument panel by pressing the appropriate button: …
How to reset the oil light on the Audi A3
How to reset the oil light on the Audi A3
Audi A3 (2012-2019 / MK 3, 8V) After performing the oil change and oil filter replacement, it is necessary to reset the indicator light. On a 2018 Audi A3 vehicle, to perform this …
How to change the gearbox oil on the Audi A3?
How to change the gearbox oil on the Audi A3?
Audi A3 (2012-2019 / MK 3, 8V) To be able to change the gearbox oil of the Audi A3 you have to go and lift the car, in order to access the lower part in correspondence with the eng…

Other guides you may be interested in

How to Replace the Gear Shift Gaiter of the Honda CR-V

You can purchase an aftermarket gear shift cover complete with a knob, made of leather with coloured stitching. The disassembly is quite straightforward: start by unscrewing the gear shift knob by twisting it. Next, detach the trim at the base of the gear lever by prying along the edges. Then, remove the chrome trim that holds the gaiter in place, peeling off the leather edges from the plastic support. Apply new double-sided adhesive to the plastic tabs to insert and stick the edges of the new gaiter, securing it with the chrome trim. Finally, fit the gaiter complete with the knob onto the gear lever, securing it with the appropriate screws and reattaching the trim to the tunnel support.

Watch the video!


by ScegliAuto

More videos