Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Glove Box Replacement on Audi A4

Model: Audi A4 B7 - Years: 2004, 2005, 2006, 2007, 2008
Part: Glove compartment

See other generations:
Video tutorial

Remove the side plastic cover of the glove box, which faces the door. Since it is simply clipped in place, you just need to pry it out with a small flathead screwdriver.

Using a 8 mm socket wrench, remove the two lower and side screws of the drawer as shown in the video. Then, open it and remove the three screws located at the top and inside.

At this point, you can pull out the glove box, disconnect the bulb's wire, and you're done. For installing the new glove box, proceed in reverse: connect the wire, install the drawer, and tighten all the screws.


Updated on 7 April 2026 by ScegliAuto


Related tutorials

Replacing the Glove Compartment Handle on the Audi A4
Replacing the Glove Compartment Handle on the Audi A4
Audi A4 (2000-2004 / B6) In this guide, follow the steps to remove and replace the glove compartment handle on the Audi A4. First, get in the vehicle and open the glove compa…
How to Disassemble the Glove Compartment of an Audi A4
How to Disassemble the Glove Compartment of an Audi A4
Audi A4 (2007-2016 / B8) Do you want to disassemble the glove compartment of your car to replace it? Let's see in this video how to take it apart from our Audi A4. First, use…
How to Remove the Fan Resistor on Audi A4
How to Remove the Fan Resistor on Audi A4
Audi A4 (2000-2004 / B6) How to remove the fan resistor on Audi A4? Let's see in this video how to perform the disassembly. Remove the plastic under the glove compartment usi…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos