Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the window control panel of an Audi A6

Model: Audi A6 C5, MK 2 - Years 1997-2004
Part: Window switch

Before we can start, we will have to go to open the front door of the driver of our Audi A6. So let's start by unscrewing and removing the lower screw that fixes the push-button panel. After that, using a thin but strong tool and leveraging it, we will have to go to disengage and extract the push button panel from the door panel. By doing so, we will have reached the internal plug connected to the keypad. We then proceed by going to disconnect this plug. When we have completed this last step, we will have successfully completed the disassembly of the window control panel of our Audi A6.

Posted on 8 March 2021 by ScegliAuto

Video tutorial

Related tutorials

Removing the Audi A6 door button
Removing the Audi A6 door button
Audi A6 (1997-2004 / C5, MK 2) In this video we will see how to disassemble the window control panel of an Audi A6. First of all, we open the car door: then we go to insert somethi…
How to find the fuse diagram of an Audi A6
How to find the fuse diagram of an Audi A6
Audi A6 (2018-2026 / MK 5, C8) In the selected video, you can observe the fuse diagram present in an Audi A6 car. The first two fuse panels are located inside the vehicle's cabin a…
Where is the fuse box of the Audi A6 located?
Where is the fuse box of the Audi A6 located?
Audi A6 (1997-2004 / C5, MK 2) If there are malfunctions with some components of your Audi A6 second series and you want to intervene on the respective fuses, then all you have to …

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500X

Learn how to equip your car with universal roof bars. Universal roof bars are used on cars with and without roof rails (fixed bars secured to the car roof). Install the roof bar kit as shown in the video with the bars calibrated according to the width of the car. Position the brackets at both ends of the doors on the car's original roof rails. Once the width of the anchoring brackets is adjusted, tighten the bolts with the butterfly nut (if a lock is present) until fully secured to the roof rails. Finally, apply the safety caps on your Fiat.

Watch the video!


by ScegliAuto

More videos