Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Brake Button on Audi A6

Model: Audi A6 C6, MK 3 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Push button

See other generations:
Video tutorial

Let's see how to disassemble and remove the electric parking brake button located on the center console trim of an Audi A6: position the gear shift knob vertically, then, using a plastic trim tool, remove the trim piece from the center console. Next, use a screwdriver to remove the screws securing the bezel that includes the brake button (rear part of the center console), then remove the frame with the button (as shown in the video).

Finally, install the new brake button kit onto the center console as previously disassembled. Test the proper operation of the button.


Updated on 5 March 2026 by ScegliAuto


Related tutorials

Removing and Replacing the Third Brake Light of an Audi A6
Removing and Replacing the Third Brake Light of an Audi A6
Audi A6 (2004-2012 / C6, MK 3) Let’s briefly go over the instructions that will allow you to remove and replace the third brake light and its bulbs on an Audi A6. First, open the r…
How to replace the third brake light bulb of the Audi A6
How to replace the third brake light bulb of the Audi A6
Audi A6 (2004-2012 / C6, MK 3) Today we will see the instructions that will allow us to disassemble and replace the third brake light bulbs of the Audi A6. First, we open the rear …
How to Remove the Third Brake Light on an Audi A6
How to Remove the Third Brake Light on an Audi A6
Audi A6 (1997-2004 / MK 2, C5) In this video, let's see how to remove the third brake light on an Audi A6. We will also see how to remove the right rear light. Remove the plastic c…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos