Do it yourself
| ||||
|
Audi A3 - Video tutorial
Model: Audi A3
MK 2, 8P
- Years 2003-2013 Begin the work by extracting the gearshift gaiter from its seat, simply by pulling it by hand. If you find yourself in difficulty, help yourself with a plastic wedge. Raise the headset as high as you can, then lower the black circular retainer and remove the metal clamp with a flathead screwdriver, as shown in the video. At this point you can remove the headset and the gear knob from the side. Insert the knob and the new boot in the correct direction, indicated by the groove on the gear lever. Proceed backwards, thus tightening with the metal clamp and then inserting the cap in place.
Posted on 26 January 2024 by ScegliAuto
Other guides that may interest you
|
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.012
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |