Do it yourself
Frequently asked questions about cars and motorcycles

Removing Parking Sensor Module from Audi A4 B6 - B7

Model: Audi A4 B7 - Years: 2004, 2005, 2006, 2007, 2008
Part: Control unit

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the parking sensor module from an Audi A4 B6-B7 in simple steps. First, locate the position of the module, which is found at the rear; then open the trunk and remove the left side cover to access it. At this point, use a Torx screwdriver to remove its mounting screws and extract the module by disconnecting its electrical connector.

Finally, replace it with the new one by reversing the disassembly procedure!


Updated on 12 April 2026 by ScegliAuto


Related tutorials

Audi A4 (2004-2008 / B7) In today's tutorial, we will see how to remove the parking sensors on an Audi A4 B7, second generation. First, open the trunk and remove the screws s…
Audi A4 (2000-2004 / B6) In this brief guide, you will find instructions to remove and replace the alarm siren of the Audi A4. First, open the trunk and start removing the ri…
Audi A4 (2000-2004 / B6) First, obtain the sensor kit. Begin by protecting the bumper with standard masking tape used for painting. Using the installation diagram supplied wi…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos