Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Instrument Cluster on Audi A6

Model: Audi A6 C7, MK 4 - Years 2011-2018
Part: Instrument cluster

Remove the two small plastic covers shown in the video by hand, located on either side of the steering wheel. Then, using a plastic wedge, remove the cover above the vents (both center and driver side). Also, remove the strip located below the driver side vent. Unscrew the now exposed screws. Remove the plastic under the speedometer and pull out the side vent (disconnect its connector). Once the entire speedometer frame is removed, unscrew any exposed screws here and take out the speedometer itself. Disconnect the wires and you're done. Reverse the steps for reassembly.

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Remove the Dashboard Trim on the Audi A6 C6
Remove the Dashboard Trim on the Audi A6 C6
Audi A6 (2004-2012 / MK 3, C6) In today's tutorial video, you will see the instructions needed to remove the dashboard trim or cover on the Audi A6 C6, third generation. First, get…
Removing the Door Panel of an Audi A6
Removing the Door Panel of an Audi A6
Audi A6 (2011-2018 / C7, MK 4) Remove the door panel of an Audi A6 (left side). Follow these steps. Before starting the disassembly, disconnect the battery terminals located in the…
How to Remove the Instrument Cluster from an Audi A6?
How to Remove the Instrument Cluster from an Audi A6?
Audi A6 (2004-2012 / MK 3, C6) To remove the instrument cluster from an Audi A6, use a tool to pry off the air vents located on either side of the steering wheel, ensuring they are…

Other guides you may be interested in

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos