Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel of an Audi A6

Model: Audi A6 C7, MK 4 - Years 2011-2018
Part: Door trim panel

Remove the door panel of an Audi A6 (left side). Follow these steps. Before starting the disassembly, disconnect the battery terminals located in the engine compartment. Use a pry tool to remove the brushed aluminum trim at the top of the door. With a screwdriver, remove the screws from the upper door handle. Remove the other screws on the door panel. Use a pry tool to detach the retaining clips of the panel, then pull it off with your hands and disconnect it from the door. Reassemble everything by reversing the steps.

Updated on 13 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Remove the Outer Handle of an Audi A6
Remove the Outer Handle of an Audi A6
Audi A6 (1997-2004 / MK 2, C5) Remove the outer handle from inside the door of an Audi A6? Here’s how to take it apart. Remove the cover panel to access the outer handle. Once the …
Door Panel Replacement on Audi A6
Door Panel Replacement on Audi A6
Audi A6 (1997-2004 / MK 2, C5) Replacing the door panel on an Audi A6? Let's look at removing the right front panel. Unscrew the screws located in the handle holes. Remove the swit…
How do you remove the inner panel of the rear tailgate of the Audi A6?
How do you remove the inner panel of the rear tailgate of the Audi A6?
Audi A6 (1997-2004 / MK 2, C5) In order to remove the inner panel of the rear tailgate of the Audi A6, you need to loosen the screws that secure the panel to its housing: these scr…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos