Do it yourself
Frequently asked questions about cars and motorcycles

Replace the Door Panel on Audi A6

Model: Audi A6 MK 2, C5 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Door trim panel

See other generations:
Video tutorial

Here’s how to replace the door panel on an Audi A6 if it is damaged. Before starting disassembly, disconnect the battery terminals located in the engine compartment.

Remove the satin aluminum trim or faux wood trim at the top of the door, then take off the lower cover of the handle (where the buttons are). Unscrew the screws located under the inner handle and inside the cover panel (where you removed the trim). Use a pry tool to detach the retaining clips of the panel until you can remove it from the door.

Replace the cover panel or repair it.


Updated on 12 April 2026 by ScegliAuto


Related tutorials

Audi A6 (1997-2004 / MK 2, C5) Replacing the door panel on an Audi A6? Let's look at removing the right front panel. Unscrew the screws located in the handle holes. Remove the swit…
Audi A6 (2004-2012 / C6, MK 3) Remove the door panel on Audi A6? Remove the door panel. Use a pry tool to detach the plastic trim above the panel, then remove the cover near the ha…
Audi A6 (2011-2018 / C7, MK 4) Before you can start, open the left front door of your Audi A6. Begin by prying and removing the door panel inserts using a thin but sturdy tool. Nex…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos