Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace Turn Signal on Audi A4

Model: Audi A4 B8 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Side mirror

See other generations:
Video tutorial

Remove the mirror glass: it’s very simple, just pry it off with a small tool to detach it from the motor. Once it’s free, take it off by hand, remembering to disconnect the wires.

To remove the motor, unscrew the central Torx screw size 10, which is quite long. The motor won’t come off immediately because it’s stuck, but you can help it along by applying some force with your hands: don’t worry, nothing will break.

Disconnect the connector, then remove the cover secured by the Phillips screw and the three clips, as shown in the video. At this point, you will have the turn signal in front of you, so replacing it will be a breeze.


Updated on 16 April 2026 by ScegliAuto


Related tutorials

Replacing the Left Front Turn Signal Bulb on an Audi A4
Replacing the Left Front Turn Signal Bulb on an Audi A4
Audi A4 (2007-2016 / B8) Let's see how to replace the left front turn signal bulb on an Audi A4. Open the hood and secure it; remove the plastic cover above the grille. Disas…
How to Change the Turn Signal Bulb on an Audi A4 Headlight
How to Change the Turn Signal Bulb on an Audi A4 Headlight
Audi A4 (1994-2000 / B5) Let's look at replacing the left front turn signal bulb on an Audi A4 headlight. Open the hood and secure it; disassemble the headlight and remove it…
Replacing the Side Mirror on Audi A4
Replacing the Side Mirror on Audi A4
Audi A4 (2007-2016 / B8) To remove the mirror glass on an Audi A4 B8, simply pry it from the back using a wedge or a plastic trim tool: work slowly to avoid damaging any part…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos