Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Turn Signal Bulb on an Audi A4 Headlight

Model: Audi A4 B5 - Years: 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Headlight bulb

See other generations:
Video tutorial

Let's look at replacing the left front turn signal bulb on an Audi A4 headlight. Open the hood and secure it; disassemble the headlight and remove it from its housing using a screwdriver.

Disconnect the metal inspection caps (as shown in the video) and replace the turn signal bulbs and the headlight bulb itself (matching size and voltage). After replacing the damaged bulb, reinstall the cap and the headlight.

Repeat the same process for the other turn signal bulb. Finally, test the proper operation of the bulbs we replaced. -Screwdriver -Protective gloves -Socket wrench with sockets.


Updated on 8 March 2026 by ScegliAuto


Related tutorials

Replacing the Left Front Turn Signal Bulb on an Audi A4
Replacing the Left Front Turn Signal Bulb on an Audi A4
Audi A4 (2007-2016 / B8) Let's see how to replace the left front turn signal bulb on an Audi A4. Open the hood and secure it; remove the plastic cover above the grille. Disas…
How to Replace the Headlight Bulb on an Audi A4
How to Replace the Headlight Bulb on an Audi A4
Audi A4 (2000-2004 / B6) In a few simple steps, discover how to replace the low beam headlight bulb on an Audi A4. First, open the hood of the vehicle and disconnect the elec…
How to Replace the Third Brake Light Bulb on an Audi A4
How to Replace the Third Brake Light Bulb on an Audi A4
Audi A4 (2007-2016 / B8) To replace the third brake light bulb on an Audi A4, access the interior of the rear window. Use a thin object to pry off the cover. Once this cover …

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos