Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Center Console on Audi Q5 MK1

Model: Audi Q5 MK 1, 8R - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Center console tunnel

See other generations:
Video tutorial

In today's video, you will learn how to remove the center console on a first-generation Audi Q5, following the instructions below. First, get inside the vehicle and start by removing the climate control buttons; to do this, unscrew the screws located at the bottom of the center console, as shown in the video, then disconnect the electrical connectors at the back.

At this point, remove the plastic pieces of the center console by prying them off the sides; disconnect the electrical connectors of the various buttons, then remove the shift boot and knob. Now unscrew the mounting screws of the console, also accessing the rear; remove the armrest and completely disassemble the console, following the video until the end!


Updated on 16 April 2026 by ScegliAuto


Related tutorials

Resetting the Tire Pressure on an Audi Q5
Resetting the Tire Pressure on an Audi Q5
Audi Q5 (2008-2017 / MK 1, 8R) In today's video, we will see the entire procedure needed to reset the tire pressure on a first-generation Audi Q5. Start the procedure by turning on…
How to Reset the Oil Service Light on an Audi Q5?
How to Reset the Oil Service Light on an Audi Q5?
Audi Q5 (2017-2025 / MK 2, 80A) To reset the Oil Service light on an Audi Q5, turn on the ignition and then press the MENU button located on the center console. This will bring up a…
How to Reset the Service Light on Audi Q5 8R
How to Reset the Service Light on Audi Q5 8R
Audi Q5 (2008-2017 / MK 1, 8R) In this video, you can see how to reset the service light on the Audi Q5 8R: it is a very simple procedure that you can easily follow with the help o…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos