Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do I replace the air recirculation motor on the Audi A3?

Model: Audi A3 8P, MK 2 - Years 2003-2013
Part: Checks and maintenance

In order to replace the air recirculation motor of the Audi A3, it is necessary to remove the part of the dashboard located on the passenger side and also remove the relative glovebox. In this way you will have access to the rear part of the dashboard, where the air recirculation motor will also be located. To be able to remove it, it is necessary to unscrew all the bolts that fix it, to cut the old cables and disconnect the relative connectors. To mount the new motor, in addition to screwing the bolts, in some places it may be necessary to use a welding machine, to better fix the piece.

Posted on 28 August 2021 by ScegliAuto

Video tutorial

Related tutorials

How to replace the starter motor of the Audi A3
How to replace the starter motor of the Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Today in this guide we will see the procedure for disassembling and replacing the starter motor of the Audi A3, in simple steps. First, we open the e…
How to Replace the Starter Motor on an Audi A3
How to Replace the Starter Motor on an Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Lift the bonnet and remove a terminal from the battery to protect other components. Next, disconnect the connector linked to the air intake and remov…
Replacing the starter motor of the Audi A3 2.0 TDI
Replacing the starter motor of the Audi A3 2.0 TDI
Audi A3 (2003-2013 / 8P, MK 2) Let's briefly see the instructions that will allow us to disassemble and replace the starter motor of the Audi A3 2.0 TDI. First of all, we open the …

How to Remove the Front Bumper on a Renault Clio

Want to remove the front bumper on a Renault Clio? Let's see how to proceed with the disassembly in the video: open the bonnet by pulling the bonnet release lever and secure it. Unscrew the fastening pins of the upper cover of the front bumper using a socket wrench. Unscrew the screws on the front bumper, unscrew the screws under the splash guard and under the bumper. Remove the bumper from the body of the vehicle, unscrew the pins located at the side of the headlight (if you need to replace it). Fit the new bumper with the associated pins onto the vehicle, following the steps taken during disassembly.

Watch the video!


by ScegliAuto

More videos