Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the rear wiper motor on the Audi A3 8P

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Power window motor

Let's see in this short video how to disassemble and replace the rear wiper motor on the Audi A3 8P, following these simple steps. Let's start immediately by opening the rear door of our car; then we are going to remove the plastic panel, unscrewing the fixing screws and levering the sides to release it, as shown in the video. Now let's remove the plastic cap of the wiper arm and unscrew the nut that we find below, using a socket wrench; we disconnect the electric connector of the wiper motor and unscrew the screws and the fixing nuts to remove it!

Posted on 2 September 2021 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the rear windshield wiper motor of the Audi A3
Replacement of the rear windshield wiper motor of the Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Today we will see step by step instructions on how to disassemble and replace the rear windshield wiper motor of the Audi A3. First, open the rear ha…
How to remove the fuel filter on Audi A3
How to remove the fuel filter on Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Removing the fuel filter on an Audi A3? We remove the fuel filter placed under the floor of the car. We lift the car with a column bridge (we use a c…
Audi A3, A4, A5 airbag removal
Audi A3, A4, A5 airbag removal
Audi A3 (2003-2013 / MK 2, 8P) In the video tutorial in question we will see how to remove the steering wheel airbag on various Audi models (A3, A4, A5 etc.), in simple steps. Firs…

How to Replace the Engine Air Filter on a Volkswagen Polo

Remove the engine air filter from a Volkswagen Polo: open the car door, pull up the engine compartment release lever located at the bottom left of the dashboard and lift the front bonnet, securing it with the prop rod. Remove the engine soundproofing panel (if necessary), then open the air box (unscrew the securing screws), remove the cover of the filter box and take out the engine air filter. Insert a new filter into the dedicated housing (ensuring it fits snugly around the edges). Finally, refit the air box cover and tighten the screws. Close the front bonnet after maintenance.

Watch the video!


by ScegliAuto

More videos