Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the headrest on the Audi Q5 MK1

Model: Audi Q5 MK 1, 8R - Years 2008-2017

Let's see in this short guide the instructions that will allow us to remove the front headrest on the driver's side on the Audi Q5 first series, in simple and quick steps. First of all we get on board the car, on the back; then we go to press the buttons that we find near the rods of the headrest, in order to unlock the mechanism and be able to slide it upwards, as shown in the video. Once removed we move on to reassembly; to do this, just insert it in the guides, making it slide; finally, we adjust the height of the headrest, always using the buttons.

Posted on 3 September 2021 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear headrests on the Audi Q5.
How to remove the rear headrests on the Audi Q5.
Audi Q5 (2017-2025 / 80A, MK 2) Although removing headrests is never recommended, let's see how to remove the rear headrests on the Audi Q5. In this case, it becomes necessary due t…
How to disassemble the headrests of the Audi Q5
How to disassemble the headrests of the Audi Q5
Audi Q5 (2008-2017 / MK 1, 8R) Following the instructions in this guide, we will see how to disassemble and remove the front headrests, but it also applies to the rear headrests, o…
How to remove the headrests of the front seats on the Audi Q5
How to remove the headrests of the front seats on the Audi Q5
Audi Q5 (2008-2017 / MK 1, 8R) In today's video we will show you how to remove, in simple and quick steps, the headrests of the front seats on an Audi Q5 first series. First of all…

How to Remove the Front Brake Pads on a Chrysler PT Cruiser

To remove the front brake pads on a Chrysler PT Cruiser, position the car on a column lift and raise it to a comfortable height. Unscrew the pins using a socket wrench or air drill and remove the wheel. Then, use a screwdriver to detach the brake pads. Next, remove the caliper bracket and unscrew the pins on the brake disc (using a Torx screwdriver). Pull the disc towards you to slide it off the hub. Install the new brake disc with all associated pins, secure the caliper bracket to the disc and the pads, then mount the brake caliper, ensuring all pins are tightened properly. Before mounting the wheel, bleed the brake caliper and tighten the pin.

Watch the video!


by ScegliAuto

More videos