Do it yourself
Frequently asked questions about cars and motorcycles

How to start an Audi A3 with the key

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Key

Before being able to begin, we will have to open the door of the high driver, and then sit in the driver's seat of our Audi A3. So let's start by closing the door. After that, we will have to insert the key into the ignition, and turn it to the first position, thus activating the instrument panel. Once this is done, we will have to go and press and hold the clutch pedal. While we keep the clutch pressed, we will have to turn and keep the key turned clockwise, thus activating the starter motor. We will have to keep holding the key until the engine starts. When the engine starts, we can release the key, and we are done with the process.

Posted on 14 September 2021 by ScegliAuto

Video tutorial

Related tutorials

Audi A3 (1996-2003 / 8L, MK 1) Replacing the key of an Audi A3? Let's see how the battery inside the remote control key is removed. We take our ignition key and go to press the but…
Audi A3 (2003-2013 / MK 2, 8P) Let's start by pressing the upper silver button of the key of our Audi A3, so as to extract the physical key from inside the electronic key. Using a …
Audi A3 (2012-2019 / 8V, MK 3) In this tutorial we can see how to start the Audi A3 in the event of a discharge of the remote control battery. First of all, let's go inside the pas…

Other guides you may be interested in

    Frequently Asked Questions

    • A3 2012-2019 - How to fix Audi A3 central locking problem? Read answer

How to Remove the Centre Console on a Renault Scenic

Watch this video to learn how to remove the glove compartment from the rear cover of the centre console on a Renault Scenic. Use a plastic lever to pry at the edge of the side plastics as shown in the video. Once the plastics are removed, unscrew the screws located at the sides of the centre console with a suitable screwdriver, and disconnect all the power connectors. Remove the side rests from the glove compartment. Fit the new piece onto the centre cover and proceed with the assembly of the remaining parts, working in reverse order.

Watch the video!


by ScegliAuto

More videos