Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A3
    4. : How do you replace the turbine of the Audi A3?

Audi A3 - Video tutorial

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Turbine
Operation: How do you replace the turbine of the Audi A3?

In order to replace the Audi A3 turbine, it is first necessary to drain the oil from the drain plug. Subsequently it will be necessary to go and remove the manifold and the exhaust pipes, also to have easier access to the turbine. It will also be necessary to disconnect the pipes connected to the turbine, accessing from the underside of the car. At this point, accessing from the engine compartment, it will be necessary to remove the exchanger and other bulk tubes shown in the video to gain access to the turbine. Once this has been disconnected and its fixing bolts have been loosened, it will be possible to remove it from its housing and replace it.


Posted on 27 February 2024 by ScegliAuto

    Frequently Asked Questions

    • A3 2012-2019 - How to solve the Audi A3 Sportback 1.6 TDI turbine problem? Read Answer
    • A3 2003-2013 - Where is the Audi A3 turbine located? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos