Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Audi
  4. :
  5. A3
  6. : Turbine

Audi A3 - Turbine

Audi A3 (2003-2013 / 8P, MK 2)
How do you replace the turbine of the Audi A3?

In order to replace the Audi A3 turbine, it is first necessary to drain the oil from the drain plug. Subsequently it will be necessary to go and remove the …read all…
Posted on 27 February 2024 by ScegliAuto
Audi A3 (2003-2013 / 8P, MK 2)
Audi A3 1.9 TDI turbocharger removal instructions

Today we will see instructions on how to disassemble the turbocharger of an Audi A3 1.9 TDI. First of all we open the bonnet and we go to remove the intake …read all…
Posted on 17 February 2024 by ScegliAuto

Cigarette Lighter (1) Airbags (4) Alternator (5) Loudspeaker (1) Car stereo (16) Battery (20) Air Vents (8) Gearbox (2) Spark plugs (2) Glow plugs (2) Bodywork (4) Glove box (4) Control unit (1) Key (45) Locking the trunk (1) Timing belt (11) V-belt (3) Air conditioning (2) Air conditioning controls (2) -board computer (19) Checks and maintenance (86) Throttle body (2) Dashboard (7) Gearshift gaiter (1) Bearing (3) Differential (1) Headlight (14) Tail light (13) Fog lights (5) Air filter (8) Cabin air filter (17) Petrol filter (2) Diesel filter (6) Clutch (3) Grille (1) Injectors (1) Accessory Kit (4) Xenon headlight kit (1) Light bulb (7) Side turn signal light bulb (1) Headlight bulb (25) Rear light bulb (11) Interior lights ceiling light bulb (5) Third brake light (3) Handle (5) Mask (1) Engine (12) Window motor (4) Starter motor (4) Gear oil (3) Engine oil (8) Door panel (20) Front bumper (11) Rear bumper (8) Brake pads (2) Tires (8) Gear Shift Knob (7) Pump (1) Fuel pump (6) Door (6) Push button (2) Instrument cluster (22) Radiator (2) Passenger compartment heating radiator (6) Wheel (5) Fuse box (33) Seat (9) Crankshaft RPM sensor (1) Coolant temperature sensor (1) Lock (5) Outside rearview mirror (7) Interior rearview mirror (2) Manufacturer's coat of arms (3) Engine mount (2) Windscreen wipers (9) Thermostat (3) Central tunnel (4) Turbine (2) Valve (1) EGR valve (1) Interior blower (4) Side window (2) Steering wheel (10)

How to reset the oil warning light on the Alfa Romeo Giulietta

If you want to manually reset the oil change light on your Alfa Romeo Giulietta then this guide is all you need. You do not need any diagnostic tools and will be able to complete the whole procedure without any difficulty. First, go inside the car and make sure it is completely turned off. Then keep the accelerator pedal pressed and at the same time press the brake pedal six times consecutively. When finished, keep both pedals pressed and turn on the ignition. Press the brake pedal again six more times and keep both pedals depressed for approximately 50 seconds. Turn off the ignition. Release the brake pedal and hold the accelerator pedal for another 50 seconds to complete the procedure.

Watch the video!


by ScegliAuto

More videos