Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A3
    4. : Throttle body

Audi A3 - Throttle body

Throttle Body Audi A3 (2012-2019 / 8 v, mk 3)

Audi A3 (2003-2013 / 8P, MK 2)
How to Remove the Throttle Body from an Audi A3?
To replace the throttle body on an Audi A3, open the bonnet to access the engine bay. Using a flathead screwdriver, lever the lower part of the component to …Read all…
Posted on 7 June 2026 by ScegliAuto
Audi A3 (2012-2019 / 8V, MK 3)
How to Remove the Throttle Body on Audi A3
Lift the bonnet and secure it. Then, use a screwdriver to undo the locking pins of the air intake pipe and remove the part from the engine bay. Start by …Read all…
Posted on 18 March 2026 by ScegliAuto

Throttle Body Audi A3 (2003-2013 / 8 p, mk 2)

Audi A3 (2003-2013 / 8P, MK 2)
How to Remove the Throttle Body from an Audi A3?
To replace the throttle body on an Audi A3, open the bonnet to access the engine bay. Using a flathead screwdriver, lever the lower part of the component to …Read all…
Posted on 7 June 2026 by ScegliAuto
Audi A3 (2012-2019 / 8V, MK 3)
How to Remove the Throttle Body on Audi A3
Lift the bonnet and secure it. Then, use a screwdriver to undo the locking pins of the air intake pipe and remove the part from the engine bay. Start by …Read all…
Posted on 18 March 2026 by ScegliAuto
Cigarette lighter (2) Airbag (9) Alternator (6) Speaker (1) Shocks (1) Antenna (1) Air conditioning (2) Car stereo (17) Battery (24) Air vents (11) Grille (1) Transmission (3) Spark plugs (2) Glow plugs (4) Convertible top (1) Body (12) Glove compartment (6) Control unit (4) Key (90) Trunk lock (1) Timing belt (15) V-belt (4) Air conditioner (10) A/C controls (5) Onboard computer (12) Checks and maintenance (57) Throttle body (2) Dashboard (10) Shifter boot (1) Bearing (4) MAF sensor (1) Differential (2) Brake rotors (1) Rear bench seat (2) Side marker light (1) Headlight (28) Tail light (20) Fog lights (7) Diesel particulate filter (1) Air filter (13) Cabin air filter (21) Fuel filter (2) Diesel fuel filter (8) Oil filter (1) Parking brake (1) Clutch (4) Grille (3) Fuel injectors (1) Window switch (2) Accessory kit (5) Xenon headlight kit (1) Light bulb (9) Side marker bulb (5) Headlight bulb (41) Tail light bulb (13) Interior dome light bulb (6) (4) Handle (8) Exhaust muffler (1) Trim cover (1) Engine (13) Power window motor (4) Starter motor (6) Transmission fluid (3) Engine oil (10) Clock (15) Door trim panel (32) Front bumper (16) Rear bumper (10) Brake pads (3) Hydraulic pistons (1) Shift knob (11) Pump (2) Fuel pump (6) Car door (10) Push button (2) Instrument cluster (9) Radiator (2) Heater core (8) Wheel (5) Fuse box (70) Seat (12) Crankshaft position sensor (1) Engine coolant temperature sensor (1) Door lock (7) Brake system (1) Side mirror (13) Rearview mirror (3) AdBlue warning light (2) Warning light – error code (41) Tire pressure warning light (46) Service warning light (102) Manufacturer emblem (6) Engine mount (2) Fuel cap (12) Windshield wipers (13) Thermostat (4) Tie rods (1) Drivetrain (1) Center console tunnel (4) Turbocharger (3) Valve (2) EGR valve (2) Blower motor (5) Side window (4) Steering wheel (12)

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos