Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Audi
  4. :
  5. A3
  6. : Shifter boot

Audi A3 - Shifter boot

Shifter Boot Audi A3 (2003-2013 / mk 2, 8 p)

Audi A3 (2003-2013 / MK 2, 8P)
How to Remove the Gear Selector Gaiter on an Audi A3

Removing the gear selector gaiter on an Audi A3 is a very simple operation. First, use a plastic lever to remove the trim that secures the gaiter and the gear …Read all…
Posted on 29 August 2026 by ScegliAuto

Cigarette lighter (2) Airbag (9) Alternator (6) Speaker (1) Shocks (1) Antenna (1) Air conditioning (2) Car stereo (17) Battery (23) Air vents (11) Grille (1) Transmission (2) Spark plugs (2) Glow plugs (4) Convertible top (1) Body (12) Glove compartment (6) Control unit (4) Key (88) Trunk lock (1) Timing belt (15) V-belt (4) Air conditioner (10) A/C controls (5) Onboard computer (12) Checks and maintenance (56) Throttle body (2) Dashboard (10) Shifter boot (1) Bearing (4) MAF sensor (1) Differential (2) Brake rotors (1) Rear bench seat (2) Side marker light (1) Headlight (27) Tail light (19) Fog lights (7) Diesel particulate filter (1) Air filter (13) Cabin air filter (21) Fuel filter (2) Diesel fuel filter (7) Oil filter (1) Parking brake (1) Clutch (4) Grille (3) Fuel injectors (1) Window switch (2) Accessory kit (4) Xenon headlight kit (1) Light bulb (9) Side marker bulb (5) Headlight bulb (40) Tail light bulb (13) Interior dome light bulb (6) (4) Handle (8) Exhaust muffler (1) Trim cover (1) Engine (13) Power window motor (4) Starter motor (6) Transmission fluid (3) Engine oil (10) Clock (15) Door trim panel (32) Front bumper (16) Rear bumper (10) Brake pads (3) Hydraulic pistons (1) Shift knob (11) Pump (2) Fuel pump (6) Car door (10) Push button (2) Instrument cluster (9) Radiator (2) Heater core (8) Wheel (5) Fuse box (70) Seat (12) Crankshaft position sensor (1) Engine coolant temperature sensor (1) Door lock (7) Brake system (1) Side mirror (13) Rearview mirror (3) AdBlue warning light (2) Warning light – error code (41) (41) Tire pressure warning light (5) Service warning light (100) Manufacturer emblem (6) Engine mount (2) Fuel cap (12) Windshield wipers (13) Thermostat (4) Tie rods (1) Drivetrain (1) Center console tunnel (4) Turbocharger (3) Valve (2) EGR valve (2) Blower motor (5) Side window (4) Steering wheel (12)

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos