Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A3
    4. : Bearing

Audi A3 - Bearing

Audi A3 (2003-2013 / 8P, MK 2)
How to replace the front hub bearing in the Audi A3?
In this tutorial, we can see how to replace the front wheel bearing in the Audi A3, a simple operation but one that requires good manual dexterity. First of …read all…
Posted on 16 October 2023 by ScegliAuto
Audi A3 (2003-2013 / 8P, MK 2)
How to remove the front disc bearing of an Audi A3
How to remove the front disc bearing of an Audi A3? First of all, we position our car on a column bridge (jack), loosen the pins with a telescopic wrench and …read all…
Posted on 9 November 2023 by ScegliAuto
Audi A3 (2003-2013 / 8P, MK 2)
How to replace the wheel bearing
The following operation must be done by lifting the car and in total safety since a lot of force is required to disassemble the hub. You find that you need to …read all…
Posted on 24 July 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (4) Alternator (5) Loudspeaker (1) Car stereo (16) Battery (20) Air Vents (8) Gearbox (2) Spark plugs (2) Glow plugs (2) Bodywork (4) Glove box (4) Control unit (1) Key (45) Locking the trunk (1) Timing belt (11) V-belt (3) Air conditioning (2) Air conditioning controls (2) -board computer (19) Checks and maintenance (86) Throttle body (2) Dashboard (7) Gearshift gaiter (1) Bearing (3) Differential (1) Headlight (14) Tail light (13) Fog lights (5) Air filter (8) Cabin air filter (17) Petrol filter (2) Diesel filter (6) Clutch (3) Grille (1) Injectors (1) Accessory Kit (4) Xenon headlight kit (1) Light bulb (7) Side turn signal light bulb (1) Headlight bulb (25) Rear light bulb (11) Interior lights ceiling light bulb (5) Third brake light (3) Handle (5) Mask (1) Engine (12) Window motor (4) Starter motor (4) Gear oil (3) Engine oil (8) Door panel (20) Front bumper (11) Rear bumper (8) Brake pads (2) Tires (8) Gear Shift Knob (7) Pump (1) Fuel pump (6) Door (6) Push button (2) Instrument cluster (22) Radiator (2) Passenger compartment heating radiator (6) Wheel (5) Fuse box (33) Seat (9) Crankshaft RPM sensor (1) Coolant temperature sensor (1) Lock (5) Outside rearview mirror (7) Interior rearview mirror (2) Manufacturer's coat of arms (3) Engine mount (2) Windscreen wipers (9) Thermostat (3) Central tunnel (4) Turbine (2) Valve (1) EGR valve (1) Interior blower (4) Side window (2) Steering wheel (10)

How to reset the error of the VSC warning light and the ABS of the Toyota Rav4

Let's see in this guide how to reset the error of the VSC warning light or the ABS of the Toyota Rav4, analyzing the possible causes. In fact, usually the VSC warning light appears almost always simultaneously with that of the ABS; it indicates a fault in the braking system, in particular in the brake pedal switch located behind the pedal, as shown in the video. Then we get on board the car, on the driver's side, and start by unhooking and removing our switch, disconnecting the electrical connector; then let's reassemble everything, checking that the errors have been cleared from the instrument panel!

Watch the video!


by ScegliAuto

More videos