Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A3
    4. : Passenger compartment heating radiator

Audi A3 - Passenger compartment heating radiator

Audi A3 (2012-2019 / 8V, MK 3)
Replacement of the Audi A3 cabin heating radiator.
Let's see all the necessary instructions for disassembling and replacing the heater radiator of the Audi A3. First, we enter the passenger compartment and …read all…
Posted on 29 December 2023 by ScegliAuto
Audi A3 (2012-2019 / 8V, MK 3)
Guide to replacing the cabin heating radiator of the Audi A3.
These short instructions will show us the main steps on how to disassemble and replace the cabin heating radiator of the A3, but also of the A1. First of all, …read all…
Posted on 1 September 2023 by ScegliAuto
Audi A3 (2012-2019 / 8V, MK 3)
How do you replace the heating radiator of the Audi A3?
The replacement of the cabin heating radiator of the Audi A3 is done by opening the glove compartment, unscrewing its internal fixing screws completely. In …read all…
Posted on 9 August 2023 by ScegliAuto
Audi A3 (2012-2019 / 8V, MK 3)
How to fix the heater radiator on Audi A3
In this video tutorial we can see how to repair the passenger compartment heating radiator on an Audi A3, when they have clogging problems and therefore, the …read all…
Posted on 3 May 2023 by ScegliAuto
Audi A3 (2003-2013 / 8P, MK 2)
How do you replace the Audi A3 heating radiator?
To be able to replace the Audi A3's passenger compartment heating radiator, the glovebox must be opened so that the screws securing it from the inside and …read all…
Posted on 4 November 2022 by ScegliAuto
Audi A3 (2003-2013 / 8P, MK 2)
How to remove the instrument cluster of an Audi A3
How to remove the instrument cluster of an Audi A3? Let's see carefully in this video how to proceed with the correct disassembly: unscrew the tightening …read all…
Posted on 14 November 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (4) Alternator (5) Loudspeaker (1) Car stereo (16) Battery (20) Air Vents (8) Gearbox (2) Spark plugs (2) Glow plugs (2) Bodywork (4) Glove box (4) Control unit (1) Key (45) Locking the trunk (1) Timing belt (11) V-belt (3) Air conditioning (2) Air conditioning controls (2) -board computer (19) Checks and maintenance (86) Throttle body (2) Dashboard (7) Gearshift gaiter (1) Bearing (3) Differential (1) Headlight (14) Tail light (13) Fog lights (5) Air filter (8) Cabin air filter (17) Petrol filter (2) Diesel filter (6) Clutch (3) Grille (1) Injectors (1) Accessory Kit (4) Xenon headlight kit (1) Light bulb (7) Side turn signal light bulb (1) Headlight bulb (25) Rear light bulb (11) Interior lights ceiling light bulb (5) Third brake light (3) Handle (5) Mask (1) Engine (12) Window motor (4) Starter motor (4) Gear oil (3) Engine oil (8) Door panel (20) Front bumper (11) Rear bumper (8) Brake pads (2) Tires (8) Gear Shift Knob (7) Pump (1) Fuel pump (6) Door (6) Push button (2) Instrument cluster (22) Radiator (2) Passenger compartment heating radiator (6) Wheel (5) Fuse box (33) Seat (9) Crankshaft RPM sensor (1) Coolant temperature sensor (1) Lock (5) Outside rearview mirror (7) Interior rearview mirror (2) Manufacturer's coat of arms (3) Engine mount (2) Windscreen wipers (9) Thermostat (3) Central tunnel (4) Turbine (2) Valve (1) EGR valve (1) Interior blower (4) Side window (2) Steering wheel (10)

How to reset the oil warning light on the Alfa Romeo Giulietta

If you want to manually reset the oil change light on your Alfa Romeo Giulietta then this guide is all you need. You do not need any diagnostic tools and will be able to complete the whole procedure without any difficulty. First, go inside the car and make sure it is completely turned off. Then keep the accelerator pedal pressed and at the same time press the brake pedal six times consecutively. When finished, keep both pedals pressed and turn on the ignition. Press the brake pedal again six more times and keep both pedals depressed for approximately 50 seconds. Turn off the ignition. Release the brake pedal and hold the accelerator pedal for another 50 seconds to complete the procedure.

Watch the video!


by ScegliAuto

More videos