Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb on the Audi A6?

Model: Audi A6 C7, MK 4 - Years 2011-2018
Part: Light bulb

To replace the Audi A6 right headlight bulb, you must first open the hood and remove the air filter box. To do this, it will be necessary to loosen its fixing bolts and go and detach the filter box from the air ducts, also unhooking any connectors. Removing the box will allow access to the cap located in the rear part of the headlight: by removing it, it will be possible to access the bulb, disconnect it from its connector and replace it. Once the replacement is complete, you will be able to reposition the cap and install the air filter box.

Posted on 10 October 2021 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb on the Audi A6?
How to replace the headlight bulb on the Audi A6?
Audi A6 (2004-2012 / C6, MK 3) The replacement of the Audi A6 headlight bulb is carried out by opening the hood and accessing the rear part of the corresponding headlight: it will …
How to replace the headlight bulb on the Audi A6?
How to replace the headlight bulb on the Audi A6?
Audi A6 (1997-2004 / C5, MK 2) In order to replace the Audi A6 headlight bulb, you need to open the hood to access the engine compartment and remove the plastic cover at the headli…
How do you replace the headlight bulb on the Audi A6?
How do you replace the headlight bulb on the Audi A6?
Audi A6 (2004-2012 / C6, MK 3) Replacing the headlight bulb on the Audi A6 is done by opening the bonnet, so that you can access the components located inside the engine compartmen…

Other guides you may be interested in

Replace Timing Belt on Citroen C5

How to replace the timing belt on a Citroen C5? Lift the car on a column lift or jack (if necessary, remove the front wheel using a screwdriver to detach the right wheel arch liner). Once these steps are completed, lift the bonnet, remove the engine soundproofing panel and the belt cover (plastic or metal). Use a suitable spanner to loosen the tensioner pulley and slide the belt off its seat. Use a socket to unscrew the tensioner pulley securing bolt, then remove the water pump as shown in the video. Fit the new water pump (previously removed), the tensioner, and the belt itself, tightening everything with the socket. Finally, refit the belt pulley cover.

Watch the video!


by ScegliAuto

More videos