Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bulb on an Audi A4

Model: Audi A4 B8 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight bulb

See other generations:
Video tutorial

To begin, open the hood. Start by removing the protective plastic cover located under the hood by unscrewing and removing the 4 Torx screws with a T25 screwdriver.

Once the plastic cover is removed, take out the four screws that secure the headlight. Before you can remove the headlight, disconnect the connector located at the back.

After removing the connector, pull the headlight out of its housing. This will give you access to the rear cover of the bulb, which you will remove.

Upon removing the cover, you will notice that the bulb is secured by a clip, which you will remove using a flathead screwdriver. Now, remove the bulb and disconnect the connector attached to it. To install the new bulb and reassemble everything, simply follow the steps in reverse, and you will have successfully completed the replacement.


Updated on 25 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb on an Audi A4
How to Replace the Front Headlight Bulb on an Audi A4
Audi A4 (2007-2016 / B8) Follow the steps to remove and replace the front headlight bulb, whether halogen or xenon, on your Audi A4. First, open the hood of the vehicle and r…
Replacing Position Light on Audi A4
Replacing Position Light on Audi A4
Audi A4 (2004-2008 / B7) In this simple video tutorial, you will learn how to remove the front position bulb of an Audi A4. First, open the hood and remove the protective cov…
How to Replace the Third Brake Light Bulb on an Audi A4
How to Replace the Third Brake Light Bulb on an Audi A4
Audi A4 (2007-2016 / B8) To replace the third brake light bulb on an Audi A4, access the interior of the rear window. Use a thin object to pry off the cover. Once this cover …

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos