Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the car radio on the Audi A3

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Car stereo

In this short video we show you how to take out the stereo / car radio on Audi A3 and the like. To extract the lower plate of the car radio you must, first of all, get the two keys to insert into the corner holes of the same. Insert the aforementioned keys as far as they will go and, once done with both, pull them out by extracting the stereo itself. In this way you will also extract the part where the cd is to be inserted (cd player). Proceed from bottom to top to continue disassembling the central dashboard: to do this, disassemble the upper protective plastics and unscrew the screws below.

Posted on 27 October 2021 by ScegliAuto

Video tutorial

Related tutorials

How to Dismantle and Remove the Original Radio on Audi A3
How to Dismantle and Remove the Original Radio on Audi A3
Audi A3 (2003-2013 / MK 2, 8P) How to dismantle and remove the original radio on Audi A3? Follow this guide to perform the disassembly: switch off the radio, then use the original …
How does the disassembly of the central console of the Audi A3 8p take place?
How does the disassembly of the central console of the Audi A3 8p take place?
Audi A3 (2003-2013 / MK 2, 8P) The attached video tutorial could not be a better example of the work mentioned. We are talking about disassembling the central console of the Audi A…
Remove Audi A3 radio
Remove Audi A3 radio
Audi A3 (2003-2013 / MK 2, 8P) Let's see how to disassemble the car radio of an Audi A3. We use the original or aftermarket metal dongles to disassemble the car radio. We insert th…

Other guides you may be interested in

How to Remove the Cabin Fan Resistor on a Mercedes A-Class W169

If the cabin fan speed does not change when adjusted or only activates at maximum speed, the fan resistor may be damaged. Replacing it is fairly easy, and the part is readily available. The resistor is located right behind the center console, but you can access it by removing the trim panel directly below the steering column and then detaching the side cover of the tunnel. At this point, you can easily reach the resistor and its power connector; just pull it out of its housing to replace it.

Watch the video!


by ScegliAuto

More videos