Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Xenon Bulb in an Audi A3?

Model: Audi A3 8P, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Headlight bulb

See other generations:
Video tutorial

In this video tutorial, you can see how to replace a xenon bulb in an Audi A3. This is a simple operation and no tools are required. First, disconnect the battery to work safely.

Locate the rear cover of the headlamp, open it by unlocking the top clip. The next step is to disconnect and remove the starter by turning it counterclockwise.

At this point, unscrew the ring that holds the bulb in place and pull it out of its socket. The installation will be just as simple; insert the bulb, tighten the ring, reconnect and screw in the starter, and finally replace the rear cover.


Updated on 28 April 2026 by ScegliAuto


Related tutorials

How to replace the dipped beam bulb on an Audi A3
How to replace the dipped beam bulb on an Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Today, we will discover the main guide on how to dismantle and replace the front headlamp bulb on an Audi A3. First, open the bonnet of your car and …
How to replace the headlight bulb of the Audi A3.
How to replace the headlight bulb of the Audi A3.
Audi A3 (2012-2019 / 8V, MK 3) Today's instructions will allow us to remove and replace the headlight bulb of the Audi A3 in a few simple steps. First, to access the low beam bulb …
Replacing the Front Headlamp Bulb on the Audi A3
Replacing the Front Headlamp Bulb on the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) Follow these brief instructions to remove and replace the dipped beam bulb in the front headlamp of the Audi A3. First, open the bonnet of the vehicl…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos