Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the key battery on Audi Q3

Model: Audi Q3 8U - Years 2011-2018
Part: Key

Replacing the key battery on Audi Q3 is really very simple and now we will prove it to you. As shown in the video, get yourself a small flathead screwdriver and, prying it into the slot, remove the lid / cover of the remote control. Already done! At this point you can already see the sought after battery. Once this is done, using the small flat screwdriver again, remove the battery from its seat and insert a new one you purchased. This is the classic cr2032, easily available in hardware stores or large supermarkets. Reassemble the remote control.

Posted on 16 November 2021 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the battery in the Audi Q3?
Audi Q3 (2011-2018 / 8U) Changing the battery in the Audi Q3 is done by opening the hood, so that the battery can be found in its housing in the engine compartment. The devic…
How do you replace the battery in the Audi Q3?
How do you replace the battery in the Audi Q3?
Audi Q3 (2011-2018 / 8U) The Audi Q3 battery is replaced by opening the bonnet, so that you can access the components located inside the engine compartment: on the right side…
How to replace the battery of the Audi Q3 key remote control.
How to replace the battery of the Audi Q3 key remote control.
Audi Q3 (2018-2025 / F3) Today's main instructions will show us the process of disassembling and replacing the battery of the key remote for the Audi Q3, as well as the Q5. F…

Other guides you may be interested in

How to Replace the Front Headlamp Bulb on a Fiat Grande Punto

To replace the front headlamp bulb on a Fiat Grande Punto, first open the bonnet. Once done, access the rear of the headlamp where the bulb needs replacing (the bulb is of type H4). Locate the rubber cover that protects the electrical contacts and bulbs from water and moisture. Remove it by pulling on the tab. Now, pull the connector for the bulb's power supply and disconnect it from its position. At this point, push down on the top of the spring that holds the bulb in place, and you can extract the bulb from its housing. To fit the new bulb, follow the steps in reverse as shown in the images. The video also shows how to remove the position bulb, which is located just below the H4. After disconnecting the power supply, you can extract it along with the bulb holder by pressing the two tabs to release it and pulling. The bulb can then be removed from its position in the bulb holder.

Watch the video!


by ScegliAuto

More videos