Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the diesel pump in the Audi A4?

Model: Audi A4 B7 - Years 2004-2008
Part: Fuel pump

In the Audi A4 b6 and b7, to replace the diesel pump, the bottom of the luggage compartment must be removed, in this video tutorial we can see how to do it. First, we remove the two small left handles by unscrewing the four screws, remove the lower edge and the left side panel by unscrewing all the screws indicated in the video. At this point, we unscrew the large screw of the tool compartment and proceed to remove all the plastic bottom. We will find the fuel pump in the right area of the compartment, under a lid and held in place by the classic ring nut. We disconnect the connector and proceed to replace the pump.

Posted on 16 November 2021 by ScegliAuto

Video tutorial

Related tutorials

How do I replace the fuel pump on the Audi A4?
How do I replace the fuel pump on the Audi A4?
Audi A4 (2004-2008 / B7) In order to replace the Audi A4 fuel pump, you have to lift the fastening clips located in the lower part of the rear seats and in correspondence wit…
How do I replace the battery in the Audi A4 B8?
How do I replace the battery in the Audi A4 B8?
Audi A4 (2007-2016 / B8) In order to replace the battery of the Audi A4 B8, you have to open the tailgate, so that you have access to the luggage compartment: at this point t…
How to replace reverse switch on Audi A4
How to replace reverse switch on Audi A4
Audi A4 (2000-2004 / B6) How to replace the brake switch on an Audi A4? Let's see how it changes. We open the inspection compartment at the bottom left of the dashboard (we r…

Other guides you may be interested in

How to Dismantle the Heating Radiator on a Mini Cooper

Let’s see how to dismantle the heating radiator on a Mini Cooper. First, remove the plastic cover of the centre tunnel (located under the centre tunnel on the left). Unscrew the securing screws with a screwdriver, and remove the black plastic cover that hides the heating radiator. Once all the described operations are completed, move to the engine bay: remove the plastic engine cover and disconnect the two hoses (unscrew the securing clips if present) of the radiator that goes into the cabin, allowing the fluid to drain. Disconnect the radiator from the pipes inside the cabin. Work in reverse for all the assembly steps.

Watch the video!


by ScegliAuto

More videos