Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Remote Key Battery on the Audi A3 8P (MK2)

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Key

In this short and simple guide, learn how to disassemble and replace the battery in the remote key for the Audi A3 8P, second generation. First, take the remote and start by removing the rear cover, prying at the sides with something thin; this will give you access to the battery compartment, as shown in the video. At this point, remove and replace the battery with a new one of the correct type (in this case, a CR 2032 3V); insert it in the correct orientation in the battery holder and reassemble the remote cover!

Updated on 29 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Audi A3 (2012-2019 / 8V, MK 3) To replace the remote control battery of the Audi A3, lift the cover on the back of the remote, located just below the manufacturer's logo. By removi…
Audi A3 (2012-2019 / 8V, MK 3) In today's video tutorial, we will see how to remove and replace the battery of the electronic key remote for the Audi A3, as well as the A4 and A5. …
Audi A3 (2003-2013 / MK 2, 8P) Over time, the buttons on the remote key may fade or even become damaged. You can purchase an aftermarket remote key cover, to which you will attach …

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos