Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of the rear bumper of the Audi A2

Model: Audi A2 MK 1 - Years 1999-2005
Part: Rear bumper

Today we will discover the main steps to disassemble the rear bumper on the Audi A2 first series, following the instructions below. First of all we open the tailgate of the trunk and start by removing the upper plastic clip, releasing it from the bumper; then we go to unscrew the screws that we find on both sides of the wheel arches and the three screws under the bumper itself, releasing it from the sides, as shown in the video. At this point we unhook and gently remove our bumper; for reassembly just apply the reverse procedure!

Posted on 30 November 2021 by ScegliAuto

Video tutorial

Related tutorials

How to remove the battery on Audi A2
How to remove the battery on Audi A2
Audi A2 (1999-2005 / MK 1) Car battery damaged? Let's see the replacement. On our Audi A2 the battery is placed in the rear trunk. We open the luggage compartment, remove the t…
How to disassemble the headlights in the Audi A2?
How to disassemble the headlights in the Audi A2?
Audi A2 (1999-2005 / MK 1) In this tutorial we can see how to disassemble the headlights in the Audi A2, a very simple operation. To do this, we will only need a Torx T30 key. …
How to open the trunk hatch locked in the Audi A2?
How to open the trunk hatch locked in the Audi A2?
Audi A2 (1999-2005 / MK 1) In the Audi A2, it may happen that the trunk hatch gets stuck, for example due to a problem with the control button or the lock actuator. In these ca…

Other guides you may be interested in

How to Remove the Interior Light of a Mini

Remove the interior light of a Mini: use a screwdriver or plastic lever to pry between the cover and the light itself (avoid damaging the headlining), pull the cover out from the panel and disconnect the power connector after removing it. Replace the damaged bulb with a new one (same size and voltage). Refit the light into its housing (push it in with your hands until the metal clips are fully locked). Test the light's functionality before completely refitting the piece.

Watch the video!


by ScegliAuto

More videos