Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Serpentine Belt on the Audi A6 C5 (4B5)

Model: Audi A6 MK 2, C5 - Years 1997-2004
Part: V-belt

Let's go through the procedure for removing and replacing the serpentine belt on the Audi A6 C5, second generation, with a V6 engine. First, open the hood and start by removing the engine cover; then use a 17 mm wrench to loosen the belt tensioner to remove the belt, as shown in the video. At this point, replace it with the new one of the correct type, inserting it properly and turning it by hand; follow the video to the end to fully understand all the steps!

Updated on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Serpentine Belt on an Audi A6
How to Replace the Serpentine Belt on an Audi A6
Audi A6 (2004-2012 / MK 3, C6) Before starting, open the hood of your Audi A6. Begin by loosening the tensioner that keeps the serpentine belt tight, using a wrench. This will free…
How to Replace the Air Conditioning Compressor on the Audi A6 3.2L
How to Replace the Air Conditioning Compressor on the Audi A6 3.2L
Audi A6 (1997-2004 / MK 2, C5) This guide provides the main instructions for removing and replacing the air conditioning compressor on the Audi A6 3.2L. First, lift the vehicle and…
How to Replace the Serpentine Belt on an Audi A6
How to Replace the Serpentine Belt on an Audi A6
Audi A6 (2004-2012 / MK 3, C6) Before you begin, open the hood of your Audi A6. Start by unclipping and removing the upper engine cover by simply pulling it upward. This will give …

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos