Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Audi S1 wheel replacement

Model: Audi A1 MK 1, 8X - Years 2010-2018
Part: Wheel

Let's see the disassembly of the wheel on Audi S1. We open the luggage compartment and take the wheel removal kit which includes: jack, jack lever, screwdriver, bolt wrench (if present), telescopic wrench, spare wheel. We position the jack under the grip point of the car (under the stiffer part of the frame in order to bend the sheet metal due to too much weight), We lift the car with the jack lever, unscrew the pins and pull the wheel away from the hub seat. We mount the spare wheel or the wheel: we tighten all the tightening bolts. We bring the car to the ground once the assembly is finished.

Posted on 9 January 2022 by ScegliAuto

Video tutorial

Related tutorials

Replacement of brake pads on Audi A1
Replacement of brake pads on Audi A1
Audi A1 (2010-2018 / MK 1, 8X) In this very useful video guide today, we can see the entire step-by-step procedure for replacing the front brake pads on an Audi A1. We start the pr…
Replacement of the cabin air filter of the Audi A1 MK2 version
Replacement of the cabin air filter of the Audi A1 MK2 version
Audi A1 (2018-2025 / GB, MK 2) To prevent dust and dirt from entering the Audi A1 version MK2's air conditioning system from outside, a filter has been installed on the intake. By …
How to replace the front headlights of the Audi A1
How to replace the front headlights of the Audi A1
Audi A1 (2010-2018 / MK 1, 8X) Replacing the front headlights of an Audi A1 or Audi S1 vehicle is a simple and quick operation that can be done independently. To replace the headli…

Other guides you may be interested in

How to Remove the Centre Console on a Renault Scenic

Watch this video to learn how to remove the glove compartment from the rear cover of the centre console on a Renault Scenic. Use a plastic lever to pry at the edge of the side plastics as shown in the video. Once the plastics are removed, unscrew the screws located at the sides of the centre console with a suitable screwdriver, and disconnect all the power connectors. Remove the side rests from the glove compartment. Fit the new piece onto the centre cover and proceed with the assembly of the remaining parts, working in reverse order.

Watch the video!


by ScegliAuto

More videos