Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlights of the Audi A1

Model: Audi A1 8X, MK 1 - Years 2010-2018
Part: Headlight

Replacing the front headlights of an Audi A1 or Audi S1 vehicle is a simple and quick operation that can be done independently. To replace the headlights, we need to open the front hood and disconnect the connector from the headlight using a flat-head screwdriver. After disconnecting the connector, we unscrew the bolts securing the headlight. We then remove the headlight from its housing and follow the same steps to remove the right front headlight. To insert the new headlights, we must follow the reverse procedure. Once the headlights are inserted, we close the front hood and turn on the lights to test their operation.

Posted on 16 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Headlights on the Audi A1?
How to Adjust the Headlights on the Audi A1?
Audi A1 (2010-2018 / 8X, MK 1) To adjust the headlights on the Audi A1, first turn on the headlights to check the beam pattern: then open the bonnet to locate the screw situated at…
Fitting Front Grille and LED Headlights on an Audi A1
Fitting Front Grille and LED Headlights on an Audi A1
Audi A1 (2010-2018 / 8X, MK 1) The video shows how to customise an Audi A1 1.4 TFSI with an RS front grille and LED headlights: the RS grille can be found on tuningshop.it with the…
How to replace the headlight bulb of the Audi A1
How to replace the headlight bulb of the Audi A1
Audi A1 (2010-2018 / 8X, MK 1) If you want to replace the bulb of one of the two front headlights of your first series Audi A1 by yourself, just read the following guide and follow…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos