Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Audi A3 key remote control battery replacement

Model: Audi A3 Sportback MK 3 - Years 2012-2019
Part: Key

In this video tutorial we will see how to remove and replace the key remote control battery on an Audi A3 Sportback. First we take our remote control in hand and we go to pry up the back cover with something pointed, like a flat screwdriver, so that we can remove it; in this way we will access the battery, located on the back of the remote control itself. At this point we remove the old battery and replace it with the new one, of the right type (in this case a 3V CR 2032); insert it in the correct direction and replace the rear cover of the remote control!

Posted on 10 January 2022 by ScegliAuto

Video tutorial

Related tutorials

How to open the remote control and replace the battery of the A3 - A4 - A5 - A6
How to open the remote control and replace the battery of the A3 - A4 - A5 - A6
Audi A3 Sportback (2012-2019 / MK 3) Let's find out the steps on how to remove the key remote control and how to replace the battery of the Audi A3 Sportback, but also of the A4, A5 and …
How to replace the key battery of an Audi A3 Sportback.
How to replace the key battery of an Audi A3 Sportback.
Audi A3 Sportback (2012-2019 / MK 3) Replacing the remote control battery of an Audi A3 Sportback is a simple operation; let's see how to do it. We remove the plastic cover placed under …
How to replace the remote control battery of the Audi
How to replace the remote control battery of the Audi
Audi A3 Sportback (2003-2013 / MK 2) Today we are going to explain how to replace the remote control battery of our Audi. As a first step we open our key, and leveraging an object not ve…

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos