Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A3
    4. : How to disassemble the EGR valve in the Audi A3

Audi A3 - Video tutorial

Model: Audi A3 8P, MK 2 - Years 2003-2013
Part: EGR valve
Operation: How to disassemble the EGR valve in the Audi A3

We remove the protective plastic cover. We disconnect the power plug. Now using a T40 wrench we unscrew the EGR valve connecting pipe. We unscrew the 3 bolts of 10 above the manifolds in the same way. To make it easier we can remove the intercooler pipe. Now, with the help of a screwdriver, we raise the tab and extract the tube. We also loosen the bolt placed in the back. Now let's extract the EGR valve and clean it. If stuck, apply pressure to unlock it and see if it stays under tension. Now we can proceed with the reassembly by following the steps in reverse.


Posted on 7 April 2024 by ScegliAuto

    Frequently Asked Questions

    • A3 2003-2013 - What to do if I have problems with the Audi A3 EGR valve? Read Answer

How to open the Honda Sh 125 saddle when the battery is low

Let's see below how to proceed to raise and unlock the motorcycle seat when the battery is low, also helping us with the video. A square key is supplied with the scooter which is needed to unlock the saddle opening. This plastic key must be inserted into the seat inside the flap on the right side of the body immediately under the ignition switch. Then, open the plastic door and insert the key to unlock the saddle opening where we can find the battery and replace it if necessary.

Watch the video!


by ScegliAuto

More videos