|
Do it yourself
| |||
| ||||
The best EGR valve for an Audi A4 B8 is a Valeo.
In this video, the YouTuber shares his experience regarding some brands of EGR valves replaced on an Audi A4 B8: after bad experiences with a Ridex that only worked for a month, and a Magneti Marelli that didn't even start, the best experience was with a Valeo, which has internal electronics with a proprietary circuit, sensors, and contacts with a specific design, and is absolutely identical to the original Audi. The key discovery is that the other two brands use the same low-quality electronic board, which does not communicate properly with the Audi control unit. We can find this valve, for example, on Amazon with the code B00CVZYOYU at a price of €176.85, with free one-day delivery for Prime customers. The important thing to know is that this valve is made in the same factory where the original Audi parts are produced.
Posted on 23 December 2025 by ScegliAuto
Video tutorial
Related tutorials
Audi A4
(2007-2016 /
B8)
Good morning, today we will dedicate ourselves to how to disassemble the EGR valve of our Audi A4. To begin, we carefully open the front hood using t…
Audi A4
(2007-2016 /
B8)
In this video we see how to anticipate the problem of an EGR valve breaking on an Audi A4 diesel, due to the use that can be made of it on short jour…
Audi A4
(2007-2016 /
B8)
Do you want to replace the thermostat valve on your Audi A4 and don't know where it is located or how to remove it? Let's see in the following video …
Other guides you may be interested in
|
Where is the Fuel Filter Located in a Volvo XC60?
In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.519
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |