Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the EGR valve of an Audi A4?

Model: Audi A4 B8 - Years 2007-2016
Part: EGR valve

Good morning, today we will dedicate ourselves to how to disassemble the EGR valve of our Audi A4. To begin, we carefully open the front hood using the opening lever. Once opened, we proceed to remove the engine cover and the air filter assembly. By doing this, we will locate the EGR valve on the right side of the engine. We then proceed to disconnect the connections and remove the valve mounting bolts. Once this step is completed, it will be possible to remove the EGR valve and we will have finished disassembling it. To install the new valve on our Audi A4, we simply need to follow these steps in reverse, and we will have completed the replacement.

Posted on 19 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to anticipate the issue of the EGR valve breaking on the Audi A4
How to anticipate the issue of the EGR valve breaking on the Audi A4
Audi A4 (2007-2016 / B8) In this video we see how to anticipate the problem of an EGR valve breaking on an Audi A4 diesel, due to the use that can be made of it on short jour…
The best EGR valve for an Audi A4 B8 is a Valeo.
The best EGR valve for an Audi A4 B8 is a Valeo.
Audi A4 (2007-2016 / B8) In this video, the YouTuber shares his experience regarding some brands of EGR valves replaced on an Audi A4 B8: after bad experiences with a Ridex t…
How to Replace the Thermostat Valve on an Audi A4
How to Replace the Thermostat Valve on an Audi A4
Audi A4 (2007-2016 / B8) Do you want to replace the thermostat valve on your Audi A4 and don't know where it is located or how to remove it? Let's see in the following video …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos