Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on an Audi Q2?

Model: Audi Q2 MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Tire pressure warning light

Video tutorial

In this tutorial, you will see how to reset the tyre pressure light on an Audi Q2, a very simple and quick operation to perform after restoring the correct pressure in each tyre, for example, following a puncture. To do this, turn on the instrument panel and enter the settings menu using the relevant button located behind the gear lever.

Then, first enter the "car" section, followed by "servicing & checks", and finally "Tyre pressure loss ind." where you will carry out the recalibration. To verify that the procedure has been successful, you can restart the instrument panel.


Updated on 9 May 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on the Audi Q2
How to Reset the Tyre Pressure Warning Light on the Audi Q2
Audi Q2 (2016-2024 / MK 1) This guide explains how to reset the tyre pressure warning light on the Audi Q2. First, get into the vehicle and turn on the ignition; then use the k…
How to Reset the TPMS Light on the Audi Q2
How to Reset the TPMS Light on the Audi Q2
Audi Q2 (2016-2024 / MK 1) If you have just replaced or inflated one or more tyres on your 2016 Audi Q2, you must reset the pressure values to eliminate the warning light (or m…
How to Reset the Tyre Pressure Warning Light on an Audi Q2
How to Reset the Tyre Pressure Warning Light on an Audi Q2
Audi Q2 (2016-2024 / MK 1) In this short video tutorial, see how to reset the tyre pressure warning light on an Audi Q2. First, turn on the vehicle's instrument cluster, then p…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos