Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do I remove the rear license plate holder from the Audi A3?

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Checks and maintenance

In order to remove the rear license plate holder of the Audi A3, you have to open the tailgate, so that you can loosen the bolts that secure the internal panel of the tailgate itself. Once this panel has been removed, the screws that fix the license plate holder on which the vehicle license plate is installed from the inside can be unscrewed. Once these screws have been loosened and any connectors have been disconnected, the license plate holder can be removed from its housing and replaced with a new spare part, also fitting all the other removed parts.

Posted on 28 March 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the license plate bulbs on the Audi A3 8PA
How to replace the license plate bulbs on the Audi A3 8PA
Audi A3 (2020-2026 / 8Y, MK 4) In this video we will show you how to replace the license plate bulbs on the Audi A3. The led bulbs cost about 20 auro and are of excellent quality. …
How to replace the mirror bulb on an Audi A3
How to replace the mirror bulb on an Audi A3
Audi A3 (2012-2019 / MK 3, 8V) Let's see how to replace the bulb located in the exterior rearview mirror of an Audi A3. With a screwdriver or plastic lever we remove the spotlight …
Replacement of the internal rearview mirror of the Audi A3
Replacement of the internal rearview mirror of the Audi A3
Audi A3 (2020-2026 / 8Y, MK 4) Today we will see the process of disassembling and replacing the interior rearview mirror of the Audi A3. First of all, we get into the cabin and sta…

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos