Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Audi A3

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Warning light – error code

To reset the service light on the Audi A3 8P, start by turning on the instrument cluster. Take the button on the right of the speedometer, lift it, and note the mileage for the service; when the mileage appears, press and hold the button on the right of the speedometer until dashes appear on both the mileage and days. When the dashes appear, wait a few seconds and turn off the instrument cluster. Finally, turn the instrument cluster back on, take the button on the right of the speedometer, lift it, and check that the new mileage (for the next oil change) is displayed.

Updated on 15 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on an Audi A3
How to Reset the "Service" Light on an Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Before you can start, sit in the driver's seat of your Audi A3. Activate the instrument cluster by turning the key in the ignition without starting t…
How to reset the service indicator on an Audi A3
How to reset the service indicator on an Audi A3
Audi A3 (2012-2019 / 8V, MK 3) The tutorial in question shows how to reset the service light of an Audi A3 car. Get into the vehicle, insert the key into the slot and turn it to th…
How to Reset the Service Light in an Audi A3?
How to Reset the Service Light in an Audi A3?
Audi A3 (2003-2013 / MK 2, 8P) In this tutorial, we will see how to reset the service light in an Audi A3, an extremely simple and quick operation to perform only after completing …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos