Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the central tunnel of the Audi A3

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Center console tunnel

In today's video you will see how to disassemble the Audi A3 central tunnel. First, equip yourself with two sharp objects, such as spatulas, which we will need for the operation. At this point we can begin. We enter the car, at the front, no matter which side you prefer. Pry at both ends until the central tunnel is released from its catches. At this point unhook the gearshift gaiter and then proceed to extract the part in question, not forgetting to disconnect the power cable found below. Operation finished. As you have seen, quick and easy.

Posted on 3 May 2022 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Centre Tunnel on an Audi A3
How to Remove the Centre Tunnel on an Audi A3
Audi A3 (2012-2019 / 8V, MK 3) In this video, see how to remove the centre tunnel on an Audi A3. Use a plastic lever to pry off the trim located at the bottom of the centre tunnel,…
How to disassemble the central console of the Audi A3.
How to disassemble the central console of the Audi A3.
Audi A3 (2012-2019 / 8V, MK 3) Let's see the main information useful for disassembling and replacing the central console of the Audi A3, in simple and quick steps. First of all, we…
How do you remove the center tunnel of the Audi A3?
How do you remove the center tunnel of the Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) In order to disassemble the central tunnel of the Audi A3 you need to have some plastic levers, which must be used to disengage the fixing clips of t…

Removing the Ignition Switch from a Mercedes C-Class W204

In this short video, you will see how to remove the ignition switch from a Mercedes C-Class (Mercedes W204). First, remove the chrome trim (if present) around the ignition switch by prying it off with a screwdriver (preferably something soft to avoid damaging the dashboard). Next, remove the plastic trim around the gauge cluster where the tachometer and speedometer are located, as well as the rectangular plastic trim surrounding the steering wheel. Simply unclip it. Now, press and push the ignition switch to release it from the housing, and you're done!

Watch the video!


by ScegliAuto

More videos