Do it yourself
| ||||
|
Audi A3 - Video tutorial
Model: Audi A3
MK 3, 8V
- Years 2012-2019 Let's see in this video how to remove the central tunnel on an Audi A3. With a plastic lever we remove by levering the lining placed in the lower part of the central tunnel, we disassemble the leather gearshift gaiter. After removing the plastic covering, unscrew the locking pins in the rear part of the central tunnel with a socket wrench. Once this operation has been carried out, we go to pull away the tunnel, disconnect any power cables. Finally we insert the new piece in the central tunnel compartment, we reassemble all the components of the glove compartment as we have previously disassembled.
Posted on 20 October 2023 by ScegliAuto
Other guides that may interest you
|
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.013
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |